[X]Assistant

[Dhanvantari]

DiscussionAlcatel Pixi 4 Plus Power
Alcatel Pixi 4 5023F
Description |Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory is in your machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.
  

Specifications

пїЅпїЅ: download

Android 6.0
Networks:GSM, 3G (microSIM + nanoSIM + microSD)
Screen:5.5 inches (IPS / 1280x730 / Dragontrail glass / 5 touches)
CPU:MediaTek MTK6580 (4x1.3GHz, 28nm, 32bit, Mali-400MP2)
RAM:1 GB (LPDDR3)
Permanent memory:16 GB (eMMC 5.1)
Hybrid slot for microSDHC memory cards:up to 64 GB
Cameras:8 (13) Mpx (autofocus, flash), max. video recording 1080 * 30 (H264, mono) / 2 (5) Mpx (front, flash)
Interfaces:Wi-Fi 802.11b / g / n, Bluetooth 4.0, GPS, FM, OTG, 3.5mm (headphone / sound fromArkamys )
Sensors:G-sensor, proximity sensor, light sensor, missed event LED
Battery capacity: 5000 mAh(non-removable, fast charging (3h 25min), charging other devices)
Dimensions (WxWxT):152 * 78.3 * 9.9 mm
Weight:202 gr
Equipment:Smartphone, 5V-2A charger, USB cable, OTG cable (for charging other devices only), headset, manual

Photo

Useful

Of FlashTool firmware [factory]
Firmware v1.7 under FlashTool

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedAlexanderL - 03.07.18, 13:40

Reason for editing: Of. FlashTool firmware [factory]

[andscape]

I welcome everyone! I purchased this device and everything seems to be good, but there is one problem. When the quality of the connection drops to E or a pair of 3G sticks, the microphone starts to “fart” and the other person can only hear it. village). Does anyone have any ideas what can be done about it?

[Samis]

Stock

Attached files

recovery.img(9.49 MB)

[zoha2010]

Samis
thank

[Herji]

Does anyone have a discharge schedule for it?
Or at least what reference points can (% - voltage)?

I have a few oddities and do not quite adequately evaluate it as a percentage, with "waves" somehow, although it seems to be working off its capacity.
// I do not want to do calibration with the program yet, I did it 0-100-0 several times.

[boriskinch]

Hello, kind people, please post a backup firmware

[bra4ozz]

After a month of use, the speaker began to wheeze after two days. I finally died, I didn’t sew, I didn’t fly;

[Samis]

boriskinch, here laid out

[sherhan10]

nobody changed the touchscreen for it?
I want to know whether it is changing separately or assembled with a display?

The question is removed. Touchscreen can be replaced separately from the display

Post has been editedsherhan10 - 23.12.18, 23:28

Reason for editing: Question cleared

[Vasiliy11081984]

Hello, and whoever ruled it? and how was it done?

[100karat]

full brick PEOPLE WHAT TO DO? ALREADY EVERYTHING TESTED
FLASH IS NEGOTIATING OR IT IS WITHOUT ONE BURNING ON THE BODY A FIRE WIRELY NON-RIGHT ON IT IS NOT CHARGED THIS IS NEVER GOING NO

[Ketso]

Hello everyone, such a question. On the screen, false clicks began to work. Those. I click on the bottom of the screen and it works simultaneously at the top, where the notification panel. It turns out one click, and two positives

[Samis]

100karat, how can we advise something, if you didn’t say what you did with it, if you didn’t flash it, then the battery controller, and if after the installation, then give full information, what firmware, what error the flashlight produces

Post has been editedSamis - 30.01.19, 15:52

[bertum]

Generally. I installed the same root. Put twrpfrom here. Put throughadb. The whole day I suffered - it goes into the bootlap and that's it. By the way, I tried using the SP flash tool. Once installed, I do not know how - one scanner you put a tick on the recovery is not put, the other you give - "download only" it does not fit, spat, started to install via adbaccording to this instruction.

instruction

1. Installing drivers
2. Unpack the archiveadb.rar(12.53 MB)
on the "C" drive, it turns out the folder "C: \ adb" with the already (!) nested twrp-3.0.2-0-5023 (recovery.img).
3. Turn on USB debugging
4. Connect the included phone
5. Run the cmd command line, enter "cd c: \ adb \" without quotes.
Next: adb reboot bootloader (all further commands from under c: \ adb>
then: fastboot devices (connection test - there must be something like: "AII7SSLNVGPAKKJZ fastboot"
then: fastboot oem unlock On the phone, confirm by pressing the top volume key
then: fastboot flash recovery recovery.img should be: Sending 'recovery' (11374 KB) OKAY [0.457s] Writing 'recovery' OKAY [0.612s] Finished. Total time: 1.096s
And reboot: fastboot reboot
All - TWRP installed.

But if the body does not load as I have in the TWRP the inscription "could not mount / data, the crypto key was not found"
And Unable to mount / data, (invalid argument)
Cannot mount / system, (invalid argument)
Cannot mount drive
You need to go into twrp by pressing the top volume key:
Cleaning
Selective cleaning
Tick ​​Data
Restore or change file system
Change file system
EXT2
Swipe
Back
EXT4
Swipe
Is done
Magisk not installed. I did not try another version of supersu. The latest version of twrp is not up.

Post has been editedbertum - 06.02.19, 19:56

[Samis]

bertumYou have not viewed the topic or something, hereHERE IN THE BEGINNING OF THE THEMEand tvrp and super sous and drivers, all put in 15 seconds

By the way, someone asked about third-party firmware, there were 3 versions of Lineage OS 16.0, 15.1 (0), install, check, unsubscribe.
For impatient or with experienceHere is the site: rolleyes:

Post has been editedSamis - 04.03.19, 11:46

[bertum]

SamisPlease read carefully what is written in your post.

[Tatarinm600]

[quote name = "Samis" date = "03/04/19, 08:30" post = 82997044]
By the way, someone asked about third-party firmware, there were 3 versions of Lineage OS 16.0, 15.1 (0), install, check, unsubscribe.

Is there any success? And the fact that the links are some kind of suspicious, with the same weight and check.

[Kal'ter]

[email protected], 06:32

no need to mess with your native recovery, later I'll take off the archive, to reboot, all of a sudden someone else will transfer to fastboot

I can not restart fastboot, it hangs on the command line - waiting for any device and that's it, who managed to solve the problem?

[Samis]

Kal'ter, put firewood for adb and if you start the adb, it’s not right, you need to enter the command fastboot reboot through the terminal, the phone will reboot into normal mode

Post has been editedSamis - 08.04.19, 09:20

[Samis]

Tatarinm600, yes there are firmwares from xiaomi, the dude is just trying to make money on the file sharing service

[Kal'ter]

Samis @ 04/08/19 09:17

put firewood for adb and if you start the adb, it’s not right, you need to enter the command fastboot reboot through the terminal, the phone will reboot into normal mode

Thank you for your reply! The problem was solved by the complete discharge of the battery.

these monoblocks are still complete crap, I won’t buy myself exactly .....

And if USB debugging is disabled in the phone, will it be possible to restart?

Post has been editedKal'ter - 08.04.19, 17:58