[X]Assistant

[ThePexLimon]

DiscussionFly FS508 Cirrus 6
Fly cirrus 6, FS508
Description |Discussion пїЅ

• Before asking a question, look Android OS FAQandGlossary. Respect your and other people's time.
• To discuss and search for third-party programs / games, use the following sections: Programs and Games.
• To compare the device with competitors and on the choice of devices, please contact: Selection and Comparison.
• The available amount of RAM and memory for installing applications is discussed in the topic: How much memory do you have in the machine?
• The results of performance tests of Android devices, see the topic: Benchmark
• Before posting photos, read the topic Working with Images on the forum
• Messages that are not related to the topic of discussion (offtopic) are deleted without warning.

Specifications

Market Entry: November 2016
General characteristics
OS Version: Android 6.0
Body Type: Classic
Body Material: Plastic
Management: 3 touch buttons, 3 physical buttons
SIM card type: micro SIM + nano SIM
Number of SIM-cards: 2
Mode of operation of several SIM-cards: alternate
Weight: 138 g
Dimensions (WxHxT): 72.3x141.2x9.9 mm
Screen
Screen type: color IPS, touch
Type of touch screen: multitouch, capacitive
Diagonal: 5 inches.
Resolution: 1280x720
Number of pixels per inch (PPI): 294
Auto-rotate screen: yes
Multimedia features
Rear camera: 5 MP, 2560x1920
Photo light: rear, LED
Rear camera features: autofocus
Max. video resolution: 1920x1080
Front camera: 2 million pixels.
Audio Formats: MP3, AAC, WAV, WMA, FM Radio
Headphone jack: 3.5 mm
Connection
Voice communication standards: GSM 900/1800/1900, 3G
Data Interfaces: Wi-Fi 802.11n, Bluetooth 4.0, USB
Satellite navigation: GPS / A-GPS
Memory and processor
Processor: MediaTek MT6580, 1300 MHz
The number of processor cores: 4
Video Processor: Mali-400 MP2
Built-in memory: 8 GB
RAM: 1 GB
Support for memory cards up to 32 GB
Nutrition
Battery type: Li-Ion, removable
Battery capacity: 1900 mAh
Talk time: 7 hours
Standby time: 150 hours
While listening to music: 40 hours
Charging connector type: micro USB
Other features
Management: voice dialing, voice control
Flight mode: yes
A2DP profile: yes
Flashlight: there is
Use as a USB drive: yes
Additional Information
Complete set: smartphone, battery, charger, USB cable, earphones

Photo

Drivers and Utilities

SP FlashTool current version for Linux and Windows can be downloadedhere.
Maui Meta 3G -themeon our forum, links to the program there.
MTK drivers for firmware can be downloadedhereandhere.

Firmware

Official

Scatter for phone
FS508 SW10 firmware:
Mirror onMegasyncarchive size - 964 MB
Mirror onYandexDiskarchive size - 964 MB
FS508 SW10 firmware with NVRAM, FRP, etc. to recover from unsuccessful flashing / formatting:
Mirror onMegasyncarchive size - 959 MB

Information about this firmware from file_info.txt

name: preloader_hexing6580_we_m.bin
CPU: MT6752
CUSTOM NAME: CUST
Flash style: EMMC
Flash definitions in preloader: 7
[1] Type: MCP (eMMC + DDR3) CID: 700100563130303038
[2] Type: MCP (eMMC + DDR3) CID: 110100303038473730
[3] Type: MCP (eMMC + DDR3) CID: 450100445331303038
[4] Type: MCP (eMMC + DDR3) CID: 450100445332303038
[5] Type: MCP (eMMC + DDR3) CID: 700100454838434538
[6] Type: MCP (eMMC + DDR3) CID: FE014E50314A39354B
[7] Type: MCP (eMMC + DDR3) CID: 90014A483847316505
load adress: 0x200d00
PRELOADER END

Android info
Build ID: MRA58K
Display ID: SW10_FLY_FS508_2016_11_09
Version: 6.0
Build Date: Wed Nov 9 16:48:23 CST 2016
Model: FS508
Brand: Fly
Device: Cirrus_6
Manufacturer: Fly
Mediatek Version Release: alps-mp-m0.mp1-V2.34_hexing6580.we.m_P32
Android Info END

NVARAM
IMEI [1] from NVRAM: 356595042331453
IMEI [2] from NVRAM: 356595042331461
NVRAM END

IMEI will have to be rewritten to its own in order to avoid various excesses, I hope no one needs to explain
That this is a kind of "fingerprints" of your device and it is desirable to have your own, and not others.

Unofficial

Not yet, depends on the popularity of the smartphone

Instructions

Firmware MTK-smartphones in Windows

one). Install drivers for the firmware (in the header), you may need to disable mandatory driver signature verification in Windows (starting with Windows 8 and higher), for this you need to go to "Options в†’ Update and Security в†’ Restore в†’ Special Boot Options" and click the " Reboot now. " The computer will boot into Windows recovery mode, select "Troubleshooting в†’ Advanced options в†’ Boot options" and click on the "Restart" button. The computer will reboot into the "Boot Options" button, select the seventh item "Disable mandatory driver signature verification" by pressing F7, after which all drivers will be successfully installed ... You need to catch the moment a new device appears in the device manager and press RMB on it. Select "Update drivers" in the context menu, then specify the path to the drivers.
2). Check how the smartphone is initialized in the OS.
When connected to a Windows computer with a working bootloader, it should be defined as "MediaTek Preloader USB VCOM", being turned off and preferably without a battery.
If you see "MediaTek USB Port" instead - look for a testpoint, then you killed the bootloader.
For firmware, you only need to define the device as "MediaTek Preloader USB VCOM", otherwise you will not flash the smartphone.
3). Unpack SP FlashTool on the shortest path, and the path must not contain spaces.
four). You can unpack the firmware for smart, in the directory with the flasher in a separate folder.
five). Start SP FlashTool from the administrator, go to "Options в†’ Download", mark both checkboxes under "DA DL All with Checksum" (otherwise we will boot boot or hang on the splash screen after the firmware), close the settings, select in the line "Scatter-loading File "(" choose "button) a scatter file in the folder with the firmware. Then we change the dropdown from "Download only" to "Firmware upgrade".
6). Press the "Download" button in the flasher, then connect our body without the battery with a USB cord (relevant for MT6580 / MT6582 chips), put the phone so that during the firmware you do not accidentally pull it or the cord. We are waiting for the firmware process to end with a window with the message that everything is ready. Close this window and then disconnect the phone from the shoelace.
7). Insert the battery, turn on the phone, wait for the full load - it can last up to 10-15 minutes (individually for each device). Enjoying a pristine body.

Firmware MTK-smartphones in Ubuntu (Linux)

Add our user to the uucp group so that we can write to / dev / ttyACM. If there is no such group, add it.
In the terminal we give the command:

where user_name is your system name

sudo usermod -G -a user_name uucp

We teach the system to identify devices in the necessary mode for the firmware.
We create rules in udev to define a device in Preloader mode, for this we create a rules file, for example 51-mtkflash.rules in the /etc/udev/rules.d directory with the following content, where user_name needs to be replaced with your system name:

51-mtkflash.rules

# 0e8d: 2000 - MTK flash board
ATTRS {idVendor} == "0e8d", ATTRS {idProduct} == "2000", ENV {ID_MM_DEVICE_IGNORE} = "1"
ATTRS {idVendor} == "0e8d", ATTRS {idProduct} == "2000", ENV {MTP_NO_PROBE} = "1"
SUBSYSTEMS == "usb", ATTRS {idVendor} == "0e8d", ATTRS {idProduct} == "2000", MODE: = "0666", OWNER = "user_name"
KERNEL == "ttyACM *", ATTRS {idVendor} == "0e8d", ATTRS {idProduct} == "2000", MODE: = "0666", OWNER = "user_name"

Reboot the udev rules:

sudo udevadm control --reload-rules

Then download the archive with the flasher, unpack it in any place convenient for you. We give the rights to execute the flash_tool and flash_tool.sh files, we launch a double-click flash_tool (I personally work only in the terminal in order to fully control the situation).

The same, but more briefly for very lazy or clever and self-confident:
You can copy several commands from this manual to simplify the whole process:
Add your user to the group uucp:

sudo usermod -G -a user_name uucp
cd /etc/udev/rules.d && sudo wget http://dl.ubunix.ru/android/51-mtkflash.rules

edit it:

sudo nano 51-mtkflash.rules

replace user_name with your username, reload rules:

sudo udevadm control --reload-rules

Download SP FlashTool, unpack it into your home directory and go to its directory:

cd ~ / && wget http://dl.ubunix.ru/android/SP_Flash_Tool_exe_Linux_v5.1728.00.100.zip
unzip ~ / SP_Flash_Tool_exe_Linux_v5.1728.00.100.zip && cd ~ / SP_Flash_Tool_exe_Linux_v5.1728.00.100

We give the right to perform:

chmod a + x flash_tool
chmod a + x flash_tool.sh

Run:

./flash_tool

General continuation of the instructions:
After launching SP FlashTool, go to "Options в†’ Download", mark both checkboxes under "DA DL All with Checksum" (otherwise we will bootlup or hang on the splash screen after the firmware), close the settings, select in the "Scatter-loading File" ( button "choose") a scatter file in the folder with the firmware. Then we change the dropdown from "Download only" to "Firmware upgrade".
Press the "Download" button in the flasher, then connect our body without the battery with a USB cord, put the phone so that during the firmware you do not accidentally pull it or the cord. We are waiting for the firmware process to end with a window with the message that everything is ready. Close this window and then disconnect the phone from the shoelace.
Insert the battery, turn on the phone, wait for the full load - it can last up to 10-15 minutes (individually for each device). Enjoying a pristine body.

Repair IMEI:

In the process of writing

Useful

TWRP and ROOT

maybe soon

Google account bypass

FRP Section Format
Scatter file required for thishere
WayfromiPanda5705

There is no curator in the subject. For questions about filling the caps, please contact the section moderators via the buttonunder the messages to which you want to add links.

Post has been editedvladseverrr - 20.07.18, 16:29

Reason for editing: Google Account Bypass Method

[ThePexLimon]

seyid75Once again I repeat that the problems were only in insensitivity with the touch and the "Phone" departure. (Phone purchased in Belarus). I sewed on the firmware from the cap and there were no problems, for example, with the departure, and the touch became more responsive to work. I recommend to reflash. Try it though. Firmware is better than factory.

[@ kolya @]

Good day! Tell me, after the firmware imei flies?

[ThePexLimon]

@ kolya @, Not. Download the firmware from the header (only without nvram sections, etc.). You can sew. I advise you not to sew preloader first. Later, if everything suits you, you can also flash it.

[Luciferus666]

ThePexLimon @ kolya @,

In fact, everything is a little different.
I will explain, to dispel misconceptions about this ...

Once it has been experimentally determined that the firmware of the preloader does not kill the device, then you can immediately flash the smart with all the included firmware blocks in the "Firmware Upgrade" mode. IMEI usually flies because of the curvature of the user, who decided that he is already quite experienced in these matters. As a rule, this is due to the firmware of the Smart in the "Format All + Download" mode or when the body is explicitly formatted in the corresponding SP FlashTool tab. And another option is possible with incorrectly assembled firmware, where there is an NVRAM section included in the scatter file with zero IMEI. In the topic there is a rather detailed description of the firmware and manuals for the firmware process, if you do not understand it, then you are not internally ready to reflash your smartphone ... And to avoid mistakes, you must carefully read the manual for the firmware and if you don’t understand the algorithm of actions, then at least strictly follow it ...

If you do not understand something (although I have already written everything in detail in the manuals), then ask, no one will judge you for wanting to acquire useful knowledge and skills. That's why he and the forum ...

All success in their endeavors.

Post has been editedLuciferus666 - 02.11.17, 06:48

[@ kolya @]

ThePexLimon, Luciferus666Thanks, I will try. The sensor podglyuchivaet and when an incoming call screen fades when closing part of the display, when opened it turns on as expected, and when outgoing it goes dead for a split second and is no longer blocked ... I understand no sensor in the phone (I did not find the window), but its function somehow performs part of the display because When closing a part of the display, does it turn off? Or is it built into the display? Here in thought, there is still a guarantee, will the firmware help or not it is not known or is it the case with everyone?

[dark invader]

@ kolya @ 03.11.17, 21:34

The sensor podglyuchivaet and when an incoming call screen fades when you close part of the display, when you open it turns on as expected, and with outgoing it goes out for a split second and is no longer blocked ... I understand the sensor in the phone (I did not find the window)

But for me it doesn’t go out at all, you always have to manually extinguish the screen with the lock button. Because there is no proximity sensor in this smart.

[Rashtcom]

Scatter for FPRMT6580_Android_scatter (2) .txt(8.49 KB)


Post has been editedgrafom - 07.11.17, 07:44

Reason for editing:

[SetMcFly]

Rashtcomwhat is it for?

[Alex74rus1]

Stupid phone, rummaged for 2 days, tried so many feces (I tried all the Chinese applications))), there is no root, guys, if you can, do not buy this phone please
If anyone has any experience in getting a root for this brick, please help!

[SetMcFly]

Alex74rus1, wrote that on 6.0 only through the recovery of the root you can get

[Alex74rus1]

Help me to restore my crooked hands, please, no rue, no direct hands, no brains, I messed up everything (

[dark invader]

When smart on charging, then the screen greatly decreases the sensitivity and it is unrealistic to type text, play games. He can also open applications himself, dial numbers, etc ... But when you take off the charge, then all the bugs miraculously disappear and the phone works fine.
Is it just me?

[SetMcFly]

dark invader, I have one of the old smartphones because of the non-native power supply had

[Purple Jedi]

Hello, and what needs to be done in the 'recovery' to get root on this body?

[ThePexLimon]

Purple JediNormal recovery will not work! You need TWRP recovery.

Posted on 11/26/2017 11:03:

dark invader, I have the same thing if I am not charging in my native unit. At home all good.

[dark invader]

ThePexLimon
SetMcFly,
Damn, and I still did not even get my own charging from the box. Thank. : rolleyes:

[kanibalist]

I can not go into rewcovery, the restore team, fastboot and normal appear. I choose rekoveri. down arrow. but the phone restarts normally. I decided to put the official firmware in the header, downloaded the programs and drivers. But Spleshtul does not see the bodies! ADB drivers loaded. !!!

Post has been editedkanibalist - 02.12.17, 11:07

[ThePexLimon]

kanibalist, When you want to enter anywhere (recovery, fastboot, etc.) Cirrus have such control
Button on need to keep necessarily.
Volume Up Button - switch between items.
Volume down button -
Confirm. Try this.

Posted 12/02/2017 11:13:

kanibalistRegarding SPFlashTools I advise you to read the instructions in detail.

[kanibalist]

ThePexLimon @ 02.12.17, 13:12

Fly FS508 Cirrus 6

does not help, made all the options, the robot is stupidly worth the menu does not appear. I press with the robot up and down, the shutdown button does not leave everything exactly. Remains 1 option through the flash tool. drivers are all loaded. Task Manager sees the phone. the program itself does not see (((

[ThePexLimon]

kanibalistThe computer should see the phone as a bootlot. Make sure you have USB debugging enabled for example. As for the recovery in our smartphone, as I understand it, it does not work, I can personally make mistakes with me. No team writes and that's it.