[X]Assistant

[nirotub]

Version: 1.0.4

Screenshots

With a long (active) use of jailbreak, Apple gadgets start to work much slower. This is due to a greater extent with the installation of tweaks, which load the RAM itself. In this case, the Semi-Restore utility will be useful, allowing you to restore the current firmware version without losing the jailbreak.

With each new firmware, Apple reduces the possibility of creating software solutions for hacking the device, forcing the user to upgrade to the latest version of iOS, which usually cannot be hacked.

The Semi-Restore program allows you to recover a hacked device with a jailbreak, while remaining on the current firmware version. The utility cleans the system of excess debris, while restoring it almost to the factory settings. This is not a complete reset, because in this case the firmware would be updated to the latest version.

The work of the system recovery utility takes no more than ten minutes. To start the process, you only need to connect the gadget to the PC, open the program and press the only available button in it. After starting the process, backup copies of files will be created, garbage and software will be removed, which will inhibit the OS operation, and Cydia will be installed.

What Semi-Restore does:

• Removes all packages from Cydia.
  
• Corrects problems with the file host.
  
• Removes all user data.
  
• Corrects permissions.
  
• Solves problems with activation.
  
• Fixes bugs with iMessage / FaceTime.
  
• Eliminates problems with the launch of the security mode.
  
• Reinstalls Cydia.

What Semi-Restore does not do:

• Does not update the iOS version.
  
• Does not downgrade iOS.
  
• Does not remove jailbreak
  
• Does not jailbreak iOS.
  
• Does not fix damaged system files.

Semi-Restore works with all devices on the operating system iOS 5.0-9.1

Requirements:

• ITunes version required12.0.1 , not later. ( Windows (32-bit) , Windows (64-bit) , Mac os x )
  
• Windows XP SP3 or higher, Ubuntu 14.04 or higher (or equivalent distribution).
  
• Availability ->Opensshfrom Cydia

If you have problems opening Semi-Restore on Windows, install the packageVisual C ++ 2010 Redistributableand run the program as administrator.

Mini FAQ

A: Can I upgrade from firmware X to firmware Y using Semi-Restore?
Q: No, you can only restore the current firmware.

A: Do I need SHSH or APTickets to recover?
Q: No, since this is not a full recovery and it is at the user level, it does not require SHSH.

Project home page: http://semi-restore.com

Video instruction

пїЅпїЅпїЅпїЅпїЅпїЅпїЅ: download

SemiRestore9-Windows-1.0.4.zip(1.18 MB)
SemiRestore9-macOS-1.0.4-3.zip(389.82 KB)
SemiRestore9-Linux-1.0.4.tar.gz(206.6 KB)

Past versions

SemiRestore8-Windows-1.0.4.zip(1.09 MB)
SemiRestore8-Linux-1.0.4.tar.gz(371.25 KB)
SemiRestore8-Windows-1.0.3.zip(455.68 KB)
SemiRestore8-Linux-1.0.3.tar.gz(370.33 KB)
SemiRestore8-Windows-1.0.1.zip(491.42 KB)
SemiRestore8-Linux-1.0.1.tar.gz(360,02 KB)
SemiRestore8-Windows-1.0.zip(459.86 KB)
SemiRestore8-Linux-1.0.tar.gz(360.01 KB)
SemiRestore7-Windows-1.0.6.zip(389.74 KB)
SemiRestore7 1.0.6 Linux.tar.gz(339.36 KB)
SemiRestore7-Windows-1.0.5.zip
SemiRestore7 1.0.5 Linux.tar.gz
SemiRestore7 1.0.4 Linux.tar.gz
SemiRestore7-Windows-1.0.3.zip
SemiRestore7-Windows-1.0.1.zip
SemiRestore7-Windows-1.0.zip(368.36 KB)
SemiRestore Windows 1.0.4.zip(7.18 MB)
SemiRestore OS X 1.0.2.zip(6.73 MB)
SemiRestore Windows 1.0.3.zip(6.52 MB)
SemiRestore Windows 1.0.2.zip(6.48 MB)
SemiRestore Windows 1.0.1.zip(6.54 MB)
SemiRestore OS X 1.0.1.zip(6.73 MB)

Post has been editedT0ugh - 17.04.17, 22:14

Reason for editing: Update version

[Chilliysky]

Thank you very much) How such a telephone will appear in my hands, I'll do it right away!

[1001v]

And if there are problems like a perpetual apple, chamomile, or a phone in dfu mode, from which it is impossible to get out, then this utility will help in such cases?

[kypbep]

1001v,I think no!

[bustander]

I, personally, cannot advise using this program. My iPad 3 iOS 6.1.2 has fallen into an endless "reboot-splash screen of SemiRestore" cycle. In the program on my computer got the error "USB socket closed unexpectedly". Run as administrator, win7 x64. I think that's what will have to install iOS 6.1.3. And this oh how bad. Use better iLEX rat)

[savel.mal]

bustander
I'd better find someone with a poppy and repeat the procedure! So as not to lose the Jail)) on Windows there are always troubles, on the Mac I think everything will work out

[bustander]

there is no one with poppies nearby, but you can connect to the device via ssh. I hope they will help me out with advice on what you can do :-D

[nirotub]

bustander,
did the restoration several times. There were no problems. iPhone 4S, Windows 7 x64. The only caveat on x64, you need to automatically run "Compatibility Troubleshooting".

[bustander]

tell me how to put iLEX rat through apt-get? Hope is ghostly, that it will now help, but still

[nirotub]

Bustander @ 06/23/2013, 15:24

how to put iLEX rat

I think it would be better to ask here.iLEX R.A.T. - service tool for apple devices.

Post has been editednirotub - 23.06.13, 12:29

[bustander]

There is no result from using iLEX rat. Semirestore itself somewhere in the system writes, apparently

The most interesting thing is that all the programs see the ipad, including pp25

Post has been editedbustander - 23.06.13, 13:07

[bustander]

https://twitter.com/coolstarorgI’ve got the screen, and deleting / usr / bin / semirestorelogo fixes that.

problem solved by deleting this file and still semirestored

[maestro-1]

Did restore to 4s via ssh
Copied Semi-Restore to / var / root via itools
installed openssh, apt
connected via putty
set permission to run chmod + x Semi-Restore-1.0.1
launched ./Semi-Restore-1.0.1
pressed 0 and enter

The program deleted all installed applications and rebooted the device.

Reinstallation of cydia is not possible, it cant be downloaded.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
Performing Clean-Up.
Semi-Restore complete! Hopefully your device is working fine now.
Thanks, follow @coolstarorg on twitter or like CoolStar Organization on facebook.
Semi-Restore is Copyright©2013, CoolStar. All Rights Reserved.

After booting, he activated again, but now the tails of the deleted programs found out

[borismanasyan]

I translated this program into Russian, but it is strange why it is not on the Windows version, but only on Linux, but I think it will be soon)

[kup2012]

On Linux, there is no Semi-Restore yet. Maybe you talked about OS X and SSH?

[alexzhuravlov]

as I understand it, this stage is risky

[kup2012]

Low to low. I did on the 3GS. But yes, if A5 + then yes. It is better to use iLEX R.A.T. in this case

[maestro-1]

it was possible to remove empty folders that remained after semi-restore.
first tried to remove them through itools but they still remained, then deleted the files:
/User/Library/Caches/com.apple.LaunchServices-045.csstore
/User/Library/Caches/com.apple.mobile.installation.plist
overloaded and everything, no tails left.

The phone began to work more brightly, but it seems that the battery began to discharge faster.
although almost everyone complains about the discharge of the battery after updating the firmware.

[lesha911]

All this is good, but it would be even better if she knew how to treat an eternal apple with the inability to get into FS

[woronoff]

How to install tweaks after Semi-Restore?
After restoring the iphone 5, using Semi-Restore, tweaks disappeared and are not installed. It gives an error, - "Sub-process / usr / bin / dpkg returned an error code (1)". What to do, tell me ..?

[kup2012]

iLEX RAT take advantage. The author of the utility somewhere above gave a link.